An advanced power strip (APS) is a power strip equipped with activity detection technologies to automatically shut off the power to the electronic devices plugged into the designated outlets on it when no user activity is detected.
If you are experiencing issues with the comparison tool, please disable your adblocker.
Legrand Wattstopper Isolé IDP-3050
The Legrand WattStopper Isolé IDP-3050 is a Tier 1 APS that provides surge protection while reducing energy waste by keeping plug load equipment off when there is no occupancy. The Legrand WattStopper Isolé IDP-3050 uses a personal sensor with an adjustable countdown timer to remove power supply to the plugged-in devices when no motion is detected at the workspace for longer than the countdown timer period. If no motion is detected during the countdown, which can be set to any duration between 30 seconds and 30 minutes, the Isolé IDP-3050 will shut off the power to the “sensor controlled” outlets at the end of the countdown until motion is detected again. The personal sensor can be mounted on any convenient flat surface of the furniture with an unobstructed view to the user, such as the underside of the desk or binder bin.
Hub Highlights:
Determines workstation active plug load usage status through the presence of occupant motion
Provides 8 outlets in total, including 2 always-on outlets and 6 controlled outlets for computer peripherals and other electronics
Selectable inactivity shut-off time delay between 30 seconds and 30 minutes through a dial
Last Edited on: June 23, 2021
Model Number
IDP-3050
Current Rating
12 A
Number of Outlets
8
Number of Switched Outlets (based on user activity detection)
6
Number of Always-on Outlets
2
Number of Control Outlets Sensing Computer Activity
0
Surge Protection
740 Joules / 48,000 A
APS Tier Classification
Tier 1
Control/Detection Technology
Motion Detection
Control/Detection Accessories
Furniture-mount motion sensor
Time Delay Options
30 seconds to 30 minutes
Last Edited on: June 23, 2021
Model
IDP-3050
Date of Test
8/25/2020
Sample Size
3
Power consumption of APS when occupancy detected, switched outlets on
2.49 W
Power consumption of APS when occupancy not detected, switched outlets on
2.49 W
Power consumption of APS when occupancy not detected, switched outlets off
2.53 W
Last Edited on: November 22, 2022
Grid Service Capabilities
What are the available functionalities that can support demand response or other grid services?
None
Product Sales Model
Is the product purchased as a widget or a solution package? (Product sold as a widget is priced on a per-unit basis. Product sold as a solution package is priced based on the project, typically quoted by the manufacturer.)
Widget
Installation
In addition to the main body of the power strip, what accessory must be installed for full functionality?
Motion sensor
Installation
How is the required accessory installed?
The motion sensor can be mounted under desk or binder bin with the included double-sided tape or self-tapping screw, and the motion sensor must be plugged into the body of the power strip.
Operation
What is the behavior when no activity is detected after the countdown timer expires?
Switched outlets turn off.
Operation
What is the behavior when activity is detected again after the countdown timer expires?
When motion sensor detects activity, power to switched outlets resumes.
Operation
What is the default time delay setting (factory setting) for the countdown timer?
30 minutes
User Interface
How is the time delay on the countdown timer adjusted?
Time delay is selected through the dial on the motion sensor and is adjustable between 30 sec and 30 min, but intermediate levels are not labeled.
User Interface
How does the power strip signal the user when the countdown time is about to expire before it cuts the power to the switched outlet?
N/A
User Interface
What other user interfaces are available on the main body of the power strip?
Surge protection LED indicator; Ground fault LED indicator; Master On/Off switch (cuts power to all outlets).
User Interface
What other user interfaces are available on the accessory of the power strip?
An LED indicator for motion-detected indication; A dial for adjusting countdown timer.