Pelican Pearl (Default 800 PPM Setting)
Demand Control Ventilation (DCV) controllers integrate with the building ventilation system to modulate the amount of outdoor air based on input from a CO2 sensor. They can be used to save energy during low occupancy and improve indoor air quality during high occupancy.
Learn MoreIf you are experiencing issues with the comparison tool, please disable your adblocker.
Pelican Pearl (Default 800 PPM Setting)
Ventilation system controller with economizer and CO2-based demand control ventilation (DCV) capabilities. The device may be configured and monitored wirelessly with Pelican’s Connect web-app. The controller performance was tested at Pelican’s recommended setting of 800 PPM and at 1000 PPM.
Hub Highlights:
- No on-board display, device configuration and monitoring through Pelican Connect web-app.
- Proprietary three wire data connection to a Pelican thermostat to access wireless connection to gateway.
- Integrates with other building automation systems using Pelican’s application programming interface (API).
- Good performance under Hub simulated occupancy profiles at recommended setting.
- Cloud-based controls enable seamless software updates to connected devices
Last Edited on: Jul 26, 2022
| Date of Test | October 2021 |
| Number of Tests | 6 |
| Setting | 800 PPM (default) |
| Average Fraction of Time Underventilated | 38% |
| Average Elevated CO2 During Underventilation (ppm) | 118 |
| Average Fraction of Time Overventilated | 14% |
| Average Lowered CO2 During Overventilation (ppm) | -68 |
| Average Fraction of Time At Target Ventilation Rate | 48% |
| DCVC Full Results | See Table |
